Instagram Watch Big Valley Tractor on Youtube Find Big Valley Tractor on Facebook

Stay Connected

Land Pride DT35

DT35 for sale at Big Valley Tractor, CA. Serving your new and used equipment needs from Stockton, CA.

CroppedImage660350-DT35.jpg

DT35

DT35 Series Ditchers

 

 

FEATURES BENEFITS
Cat. 1 & 2 Fits wide variety of tractors.
Quick-Hitch adaptable Quickly and easily attach ditcher to tractor with one person.
16" or 18" Impeller Adjustable Impeller digs a nice size drainage or irrigation ditch up to 8" or 9" deep with each pass.
4 Blades on impeller 4 Blades make digging easier and smoother than fewer blades.
1/2" blades Heavy-duty blades made out of c1084 material for long life.
Blades can be rotated when worn and are replaceable. Each blade has four cutting edges to extend blade life. When one edge is worn, rotate blade 180 deg. to a new cutting edge. Replace blades when all four cutting edges are worn out.
1/2" cutting edge Impeller features 4 replaceable 1/2" hardened steel cutting edges.
Single #80 roller chain Single #80, high tensile roller chain keeps stretching to a minimum and has the strength needed to take shock loads posed by extreme digging conditions.
Bolt tension idler Chain idler is bolt adjusted to keep constant tension on chain during tough digging conditions, which also makes for smoother digging operations.
Hardened tooth sprockets Hardened tooth sprockets have the strength needed to take the load of the single 80 chain and rigorous digging conditions.
Greaseable sealed for life bearings Input and output shafts feature 2" ID ball type bearings. Ball bearings offer smooth and quiet operation. Bearings are greasable to keep properly lubricated and purge dirt out.
4-Bolt flangette Bearings are housed in 4 bolt flangettes.
Cat. 4 shear-bolt driveline Heavy-duty driveline with shear-bolt protects the unit when obstructions are encountered.
Depth controlling skid shoe Replaceable 3/8" thick skid shoe for long life and uniform depth control.
Ripper shank For hard packed soils, the Shank rips up the ground just ahead of the impeller, allowing the impeller to take in the soil vs. bouncing on hard packed soil. Shank has 2 height adjustments to match impeller diameter.
  • 30-60 HP
  • 1" Ripper shank is standard
  • 4 Adjustable blades with replaceable cutting edges
  • Impeller Settings: 16" Narrow trench or 18" Wider & deeper trench
  • Manual Material Control Deflector
  • Easily accessible chain tightener
  • Replaceable skid shoe

 

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Contact Us for Great Sales, Parts, & Service